PVI84: 4 Digit Controller with 4 Relay Outputs

	Model	: PVI84
	Accuracy	: ±0.25%
	Retransmission	: Optional
	Display	: 3½ Digits
	Relay	: 4 SPDT
	Inputs	: Universal
	Download	: [wpdm_package id=’2313′]

Description
Additional information

Description

Features :

	Universal input- Accepts Sensor Inputs (Thermocouple or RTD), Current, Voltage, & mV.
	High Indication Accuracy: ± 0.25%.
	Sensor Error Compensation (offset) and Break Detection.
	4 Alarm outputs.
	Status Indicators for outputs.
	Programmable Delay time for alarm.
	25 Program settings for each alarm.
	RS-485 Serial Communication (MODBUS).
	24 VDC Sensor Supply.
	Parameter Security via Programmable Lockouts.
	85 to 270 VAC/DC supply voltage (also available 24 VDC models).
	Compliance: CE, RoHS

Additional information

Display	: 4-digit (7 segment LED) 0.5" high.
Display Messages	: “Or” – Appears when measurement exceeds range or open sensor is detected. : “rE” – TC reverse.
Display alternating between:	: PV & HA-AL No. for high alarm. PV & LA-AL No. for low alarm.
LED Status Annunciators	: Alarm ON ( 4nos) .
Power	: 85 to 270 VAC / DC , 50 or 60Hz, 5VA.
Settings	: V ia three keys on front panel.
Memory	: Nonvolatile EEPROM retains all programmable parameters and values.
Main Sensor Input	: Universal
Temperature Units	: C° / F°.
Resolution	: Temperature: 1 / 0.1. Signal input: 0.001, : 0.01, 0.1 & 1 decimal : Point selectable.
Thermocouple inputs	: Alarm ON ( 2nos) .
J	: -200 to 750°C.
T	: -200 to 1350°C.
S	: -200 to 400°C.
E	: 0 to 1750°C.
N	: 0 to 1750°C.
U	: -200 to 900°C
K	: -200 to 1350 C
R	: 0 to 1750 C
C	: 0 to 2300 C
B	: +150 to 1820 C
L	: -200 to 600 C
W	: 0 to 2300 C
RTD input ( 2 wire or 3 wire)	—
PT100	: -100 to 850°C.
PT1000	: -200 to 300 C.
Signal inputs	—
Voltage	: 0 to 10 VDC.
Current	: 0 to 20 mA.
mV(linear)	: -5 to 56mV
Indication Accuracy	: 0.25% of Span ±1 C (After 20min. W armup)
Control And Alarm Outputs	—
Relay Output	: 5A @ 250V AC or 24VDC.
Optional	: 12VDC output to drive SSR.
Output	: 2 nos.
Alarm modes	: Alarm High, Alarm Low , Band, Fail output & Fault diagnosis.
Hysteresis	: Programmable.
Annunciator	: Programmable.
Reset Action	: Programmable – automatic or latched.
Standby Mode	: Programmable – enable or disable. or disable.
Linear Dc Output	: Optional
Re-transmission	: 0/4 to 20 mA or 0 to 5 V or 0 to 10 V.
Update rate	: 100msec.
Operating Range	: 0 to 50°C.
Storage Range	: -5 to 50°C.
Humidity	: 85% max.
Connection	: Wire clamping screw terminals.
Weight	: 342 grams