FH3N – Room Mounted Temperature Transmitter (FLP)
|
||||||
Description
Special Features :
- Good long term stability and reliability
- 100% field changeable sensors, no re-calibration needed
- Fast response Digital technology applied, multiple output optional, over voltage and reverse polarity protection, high reliability and interference capability
- Industrial design, SS probe and selectable filter
- High protection rate up to IP66 with FLP enclosure
Application :
- Omicron humidity and temperature transmitters are designed for environment monitoring and controlling in industrial and commercial buildings. These transmitters can be used for:
- Humidity and temperature monitoring of supply, exhaust and return air in Hazardous Zones
- Humidity and temperature monitoring in critical environment such as outside air
Additional information
| Relative Humidity | — |
|---|---|
| RH - Sensor | : Digital polymer capacitance type |
| RH - Range | : 0~100%RH |
| RH - Output | : 4~20mA or 0~10VDC or RS485 Modbus RTU |
| RH - Accuracy | : See model chart |
| Hysteresis | : <±1%RH |
| Response time | : <10s(25°C,in slow air) |
| Drift | : <±0.5%RH/year |
| Temperature | — |
| T - Sensor | : Solid state band gap, RTD or thermistor |
| T - Range | : 0~50°C or 0~100°C or -40~60°C or others |
| T - Output | : 4~20mA or 0~10VDC or RS485 Modbus RTU or Resistance |
| T - Accuracy | : See model chart |
| Power | : Modbus / Current Output: 7.5~36VDC, |
| Voltage Output | : 15~35VAC/DC |
| Output Load | : <600Ω (current), >2KΩ (voltage) |
| Temperature Limit | : -40~100°C, 0~100%RH (Non condensing) |
| Storage Temperature | : -40-100°C, 0~95%RH (Non condensing) |
| Housing | : Diecast Aluminium, Alloy LM6 |
| Protection | : IP66; FLP Enclosure |
| Agency Approval | : CE, CMFRI, CCOE |
| Calibration Protocol | : COML |
| Zones & Gas Groups | : Gas Groups I, IIA, IIB and Zone 1 & 2 |
| Ex-Protection | : Flameproof Ex ‘d’ |
