OMICRON’s latest HT series Temperature and Humidity transmitter meets the harsh environmental requirements for temperature and humidity measurement. Via temperature and relative humidity values, the output can be calculated for dew point temperature, absolute humidity, wet bulb temperature, the specific enthalpy and other parameters of humidity. HT series Temperature and Humidity transmitter supported wall mount type, duct type
and remote probe type. Metal probe provides a high temperature, mechanical stress, pressure and withstand harsh environments generated by the fine waterproof housing can avoid environmental contamination and prevent condensation generated. Parameter values measured through the two analog output channels,the output may
be a current or voltage output. You can simply establish a network by RS485 connection to achieve remote monitoring and data logging, measurement data through the storage device for analysis and processing. LCD monitor would displays three measurement parameters at the same time, or the font is enlarged for single display to provide different visual needs. Touch buttons without having to open the housing can be set a one point adjustment for temperature and humidity, output selection, range setting, adjustment parameters, and do not carry the
computer in the environment field will be able to complete the setup work.

 Features

• Remote probe w/M12 connector.
• Metal probe reduces electromagnetic interference.
• 2-wire 4…20mA output with selectable physical quantity.
• 0 … 100%RH measurement, temperature range up to +120 °C (248 °F).
• Probe pressure up to 10 bar.
• Display and touch buttons for convenient operation optionally available.
• Excellent quality and stable measurement.
• IP-65 housing.
• 1-point user adjustment.
• Analog output and RS485.
• MODBUS RTU protocol with integer and floating type.
• Unit support for metric or imperial units.
• Alarm output optional.
• Dip switch setting.

The post HT – Series : Humidity & Temp. Transmitter appeared first on Omicron Sensing Pvt Ltd.

Applications and Features

H8 wall mount absolute humidity transmitters are designed for environment monitoring and controlling in industrial, commercial and other buildings. These transmitters can be used for indoor air temperature and humidity monitoring in various industrial plant, clean room, lab, machine room, office and commercial building, airport, station, library and stadium, etc.

Features

• High performance digital sensors and circuits, ensure accurate measurement and temperature compensation.
• Good long term stability and reliability.
• 100% interchangeable sensors, no re-calibration needed.
• Fast response.
• Light and state of art house, easy installation and wiring.
• Digital technology applied, multiple output optional, over voltage and reverse polarity
  protection, high reliability and interference capability.

The post H8 : Humidity Transmitter appeared first on Omicron Sensing Pvt Ltd.

The post ET18 : Duct Mount Enthalpy Transmitter appeared first on Omicron Sensing Pvt Ltd.

Features :

• High performance digital sensors and circuits, ensure accurate measurement and temperature compensation.
• RH, Temperature, Dewpoint and Enthalpy Output available on Modbus.
• 100% field changeable sensors, no re-calibration needed.
• Fast response.
• Multiple output signals selectable: 4-20mA, 0-5V or 0-10V for RH and Temperature.
• Display in degrees Fahrenheit or Celsius (by connection to Modbus).

The post ET17 : Humidity Temperature Transmitter appeared first on Omicron Sensing Pvt Ltd.

Introduction :

The ADP14-DM-FLP transmitter series incorporate the best high accuracy and great stability relative humidity and dew point
temperature sensors. They convert the measured values into linear 4 to 20 mA signals and optional 0 to 10 Vdc output can also be offered under request
The microprocessor based circuit enables full configuration of output range when used with the PC interface and the Windows based software.
The humidity signal can be configured to either relative humidity or dew point output.
The ADP14-WM-FLP model is dedicated to wall mounted applications and the ADP14-DM-FLP version is suitable for duct and through-the-wall applications in hazardous environments.

Configuration :

ADP14-WM and ADP14-DM configuration is performed by using the software and interface which is connected to a PC RS232 comm port
During configuration the transmitter must be electrically powered and this can be provided by the Config interface which draws power from the RS232 port. Some PC RS232 ports do not provide enough voltage and in this case an external energy source must be used.
A practical choice is to use a 9 V battery attached to the TxConfig interface battery clip. Another way is to energyse the transmitter via its regular loop-power source.
With the configuration one can set the transmitted output range, correct measuring deviations (zero correction) and choose sensor failure conditions (upscale or downscale). Sensor internal information as serial number, product version and model can be also be digitally presented in the programming software menu.
The factory defauld settings are:

• Humidity measuring range: 0 to 100%;
• Temperature measuring range: 0 to 100°C;
• Upscale signal outputs when sensor break or failure.

The post ADP14-DM-FLP – Relative Humidity, Dew Point & Temperature appeared first on Omicron Sensing Pvt Ltd.

The ADP14-DM transmitter series incorporate the best high accuracy and great stability relative humidity and temperature sensors. They convert the measured values into linear 4 to 20 mA signals or 0 to 10 Vdc output can also be offered under request
The microprocessor based circuit enables full configuration of output range when used with the TxConfig PC interface and the Windows based software.
The sensor can be configured for dewpoint and absolute humidity.

The post ADP14DM – Relative Humidity, Dew Point & Temperature appeared first on Omicron Sensing Pvt Ltd.

The exact monitoring of dew point temperature in compressed air systems, dryers for plastic and other industrial processes is becoming increasingly more important.The 0M375 is designed for measurement of low dew points in OEM applications down to -60°C.The core of the transmitter is the monolithic measure¬ment cell type HMC01 developed by Omicron Sensing in thin-film technology.An autocalibration procedure which is integrated in the device and years of experience in low humidity adjust-ment make an
accuracy of <2°C Td (±3.6°F Td) possible. The transmitter has one analogue output for dew point, frost point or ppm volume concentration.

The post OM375 : Compact Dew Point Temperature Transmitter for OEM Applications appeared first on Omicron Sensing Pvt Ltd.