Features :

• Renovated SPDT micro switch ensures the reliable switch function
•  Stainless steel paddle
• Cut-in and cut-out
• Brass level
• IP65 housing
• 15(8A) 250VAC switch rating
•  Max.liquid temp 120˚C
• Max working pressure 13.5Bar

The post FSPT – AIR : Air Flow Switch appeared first on Omicron Sensing Pvt Ltd.

Airflow Probes used in the Omicron Airflow Measuring Stations utilize a unique in-line groove for total pressure sensing and dual ports for static pressure sensing which produces a higher differential pressure for very low velocity measurements. The total and static pressure measuring points are distributed for equal-area averaging of flows resulting in improved accuracy and reliability. This design permits accurate and stable measurement in highly turbulent flow locations with directional pitch and yaw varying up to 0 degrees without the need for air flow straighteners which restrict airflow and can easily become clogged. The elliptical shape of the Airflow Probes allows air to glide unrestricted around the aerodynamically designed sensors and offers the lowest pressure drop of any airflow measuring device available minimizing ПVAC operating costs.

The post AFMSW : Duct Mounted AFMS appeared first on Omicron Sensing Pvt Ltd.

Airflow Probes used in the Omicron Airflow Measuring Stations utilize a unique in-line groove for total pressure sensing and dual ports for static pressure sensing which produces a higher differential pressure for very low velocity measurements. The total and static pressure measuring points are distributed for equal-area averaging of flows resulting in improved accuracy and reliability. This design permits accurate and stable measurement in highly turbulent flow locations with directional pitch and yaw varying up to 0 degrees. The elliptical shape of the Airflow Probes allows air to glide unrestricted around the aerodynamically designed sensors and offers the lowest pressure drop of any airflow measuring device available minimizing ПVAC operating costs.

The post AFMS : Duct Mounted AFMS appeared first on Omicron Sensing Pvt Ltd.

Special Features:

• Based on Thermal Measurement Principles
• Sensitive Hot Film Sensor
• Strong Pollution Tolerance
• Low Airflow Angle Dependance
• Wide Temperature Range with Temperature Compensation
• Over Voltage and Reverse Polarity Protection
• Multiple Outputs Available
• Field Jumper Selection for Velocity Ranges
• Fast Response Time

Applications:

Explosion proof Air Velocity Transmitters Are Used For Various Applications To Detect,
Adjust And Control Air Velocity In Ventilation Measurement And Control Systems To
Satisfy The Relevant Ventilation Requirements And Effectively Reduce The Energy
Consumption.

The post AVT410-Ex – Air Velocity Transmitter appeared first on Omicron Sensing Pvt Ltd.

Special Features :

• Based on Thermal Measurement Principles
• Sensitive Hot Film Sensor
• Strong Pollution Tolerance
• Low Airflow Angle Dependence
• Wide Temperature Range with Temperature Compensation
• Over Voltage and Reverse Polarity Protection
• Multiple Outputs Available
• Field Jumper Selection for Velocity Ranges
• Fast Response Time

Application :

AVT1 Air Velocity Transmitters Are Used For Various Applications To Detect, Adjust And Control Air Velocity In Ventilation Measurement And Control Systems To Satisfy The Relevant Ventilation Requirements And Effectively Reduce The Energy Consumption.

The post AVT310 – Air Velocity Transmitter appeared first on Omicron Sensing Pvt Ltd.

Special Features :

Capable of temperature compensation and linear adjustment ‧ Double line character : air velocity & temperature ‧ Switch for physical quantity: [m/s],[ft/s],[km/h],[mph],[knot] ‧ RS-485 Communication interface, Modbus RTU protocol ‧ Configuration measuring range/analog output/ station number by dip switch or RS-485 Off SET function by bottom or RS-485 ‧ Programmable softeware : DATA LOGGER, record, and chart analysis

Application :

Monitor gas and flow for industrial process ‧ Compressed air consumption measurement ‧ HVAC, building, factory, Clean room, hospital ‧ Semiconductor, electronics, paper, iron and steel, food, Pharmaceutical, biotechnology industry

The post AVT210 – Air Velocity Transmitter appeared first on Omicron Sensing Pvt Ltd.

	Measuring range: 1 m/s, 10m/s, 20m/s
	Highly stability and repeatability
	Smaller tolerance in setting angle
	An economical choice, high C/P ratio

Application :

Monitoring for HVAC process Environmental control and clean room Laminar flow control

The post FTS07 : Air Velocity Transmitter appeared first on Omicron Sensing Pvt Ltd.

	Air Flow Measurement
	Low Installation Costs
	Long Term Accuracy
	Minimal Unrecovered Pressure Loss
	Mass Flow Measurement

Applications :

The Pitot Tube is a differential pressure producer suitable for airflow measurement. It includes multiple sensing points to measure total and static pressures. It is easy to install and cost-effective. It offers simple, low-cost installation into pipes and ducts, and high energy savings due to its low unrecovered pressure loss. There are no
moving parts or sharp edges to wear, so long-term accuracy can be maintained. It contains a rubber cap, Plastic base, and two 1 meters length air tubes.

The post PTT : Aluminium Pitot Tubes appeared first on Omicron Sensing Pvt Ltd.

Measurement Down to 0m/s Low Angular Dependence Easy Installation

Applications :

AV66 air velocity transmitter series are designed for high accuracy measurement of lowest air velocities. It is the ideal solution for laminar flow control and special ventilation applications. The AV thin film sensor is operating on an innovative hot film anemometer principle.This guarantees excellent accuracy for air velocity down to almost 0.15m/s, which is not possible for conventional anemometers with commercial temp erature sensors or NTC bead thermistors.The AV66 sensor is much more insensitive to pollution than all other anemometer principles. This increases reliability and reduces maintenance costs.AV66 series are available with
current or voltage output,he measuring range and the response time can be selected with jumpers by the user.Low angular dependence enables easy, cost-effective installation.An integrated LC display and a version with remote sensing probe are also available

The post AV66 : Air Velocity Transmitter for Measurement of Lowest Velocity appeared first on Omicron Sensing Pvt Ltd.

	Based on Thermal Measurement Principles
	Sensitive Hot Film Sensor
	Strong Pollution Tolerance
	Low Airflow Angle Dependance
	Wide Velocity Range with Temperature Compensation
	Multiple Outputs Available
	Field Jumper Selection for Velocity Ranges

Applications :

AVT4 Air Velocity Transmitters Are Used For Various Applications To Detect, Adjust And Control Air Velocity In Ventilation Measurement And Control Systems To Satisfy The Relevant Ventilation Requirements And Effectively Reduce The Energy Consumption.

The post AVT4 : Remote Probe Air Velocity Transmitter appeared first on Omicron Sensing Pvt Ltd.